Difference between revisions of "How to install Openstack Newton"

Revision as of 21:30, 22 August 2018

For this tutorial, we will be installing Openstack Newton on Ubuntu 16.04 (Xenial). You can use the same tutorial also on Debian 8 (Jessie) but this will install Openstack Mitaka. This tutorial is to help people that wants to start to learn Openstack.

Prerequisites

To complete this tutorial, you'll need the following:

1 controller node

1 compute node

Hardware requirements

According to the Openstack Documentation, to run several CicrOS instances you will need:

Controller Node: 1 processor, 4 GB memory, and 5 GB storage
Compute Node: 1 processor, 2 GB memory, and 10 GB storage

This this tutorial I am using:

Controller Node: 2 processors, 16 GB memory, 2x250GB disks in a Raid1 configuration and 2 NIC's (eno1 and eno2)
Compute Node: 2 processors, 16 GB memory, 2x350GB disks in a Raid1 configuration and 2 NIC's (eno1 and eno2)

Your environment doesn't have to have 2 disks in Raid1 configuration, 1 disk will be okay.

Networking

I am using a Cisco switch to setup 2 VLAN's

manegment VLAN
Provider VLAN ( Internet)

If you don't have a Cisco switch, you can use two 4 port switches

Controller node

Update hosts file

Make sure the node has Ubuntu 16.04 installed with all updates. If you do not have a DNS server in your environment manually update the hosts file

/etc/hosts

controller mgmt_IP_address    controller.your_domain_name      controller
compute mgmt_IP_address       computer.your_domain_name        compute

example

10.192.16.38                  controller.dfw.ppnet             controller
10.192.16.67                  compute.dfw.ppnet                computer

In my case I have a DNS server in my environement so my /etc/hosts file looks like this:

127.0.0.1       localhost
10.192.16.38     controller.dfw.ppnet   controller
# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

update Interface

In my environment I have a DHCP server and a DNS server on the lab network and all the install on the lab network are done by pxe boot and a preseed file that auto configure my first network interface. My interface file looks like the one below. If you do not have a DHCP or DNS server you can do this manually.

# The primary network interface
auto eno1
iface eno1 inet static
       address 10.192.16.38
       netmask 255.255.252.0
       network 10.192.16.0
       broadcast 10.192.19.255
       gateway 10.192.16.1
       # dns-* options are implemented by the resolvconf package, if installed
       dns-nameservers 10.192.16.2 10.192.16.4
       dns-search dfw.ppnet
# The secondery network interface
auto eno2
iface eno2 inet static
       address 10.192.0.75
       network 10.192.0.0
       netmask 255.255.255.0

Compute node

Update hosts file

Make sure the node has Ubuntu 16.04 installed with all updates. If you do not have a DNS server in your environment manually update the hosts file

/etc/hosts

controller mgmt_IP_address    controller.your_domain_name      controller
compute mgmt_IP_address       computer.your_domain_name        compute

example

10.192.16.38                  controller.dfw.ppnet             controller
10.192.16.67                  compute.dfw.ppnet                computer

In my case I have a DNS server in my environement so my /etc/hosts file looks like this:

127.0.0.1       localhost
10.192.16.67     compute.dfw.ppnet   compute
# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

Update interface

# The primary network interface
 auto eno1
 iface eno1 inet static
       address 10.192.16.67
       netmask 255.255.252.0
       network 10.192.16.0
       broadcast 10.192.19.255
       gateway 10.192.16.1
       # dns-* options are implemented by the resolvconf package, if installed
       dns-nameservers 10.192.16.2 10.192.16.4
       dns-search dfw.ppnet
# The secondery network interface
auto eno2
iface eno2 inet static
       address 10.192.0.73
       network 10.192.0.0
       netmask 255.255.255.0

Testing Network

From you controller node ping the compute node

ping compute.dfw.ppnet
PING compute.dfw.ppnet (10.192.16.67) 56(84) bytes of data.
64 bytes from compute.dfw.ppnet (10.192.16.67): icmp_seq=1 ttl=64 time=0.286 ms
64 bytes from compute.dfw.ppnet (10.192.16.67): icmp_seq=2 ttl=64 time=0.213 ms
64 bytes from compute.dfw.ppnet (10.192.16.67): icmp_seq=3 ttl=64 time=0.209 ms
64 bytes from compute.dfw.ppnet (10.192.16.67): icmp_seq=4 ttl=64 time=0.216 ms

From your compute node ping the controller node

ping controller.dfw.ppnet
PING controller.dfw.ppnet (10.192.16.38) 56(84) bytes of data.
64 bytes from controller.dfw.ppnet (10.192.16.38): icmp_seq=1 ttl=64 time=0.206 ms
64 bytes from controller.dfw.ppnet (10.192.16.38): icmp_seq=2 ttl=64 time=0.186 ms
64 bytes from controller.dfw.ppnet (10.192.16.38): icmp_seq=3 ttl=64 time=0.166 ms

Now that our environment is ready lest move to the OpenStack installation.

Controller node installation

Login to your controller node as root and copy the script below into you root directory.

Create a repertory called controller and download and upload all the files into the directory

Note: I am using password=password1 for all passwords in this tutorial. You can use a different password.

Location where you need to use a password:

MYSQL passwword
RabbitMQ password
User keystone password
User glance password
User nova password
User neutron password

vi install-controller-node.sh

#!/bin/bash
#If you are not using a DNS server make sure you have 
#serverIP   FQDN   hostname in your /etc/hosts file
if [ "$(id -u)" != "0" ]; then
  echo "This script must be run as root" 1>&2
  exit 1
fi
PASSWORD=password1
CONFIG_DIR=/root/controller
file="99-openstack.cnf"
export DEBIAN_FRONTEND=noninteractive
debconf-set-selections <<< 'mariadb-server-5.5 mysql-server/root_password password '$PASSWORD
debconf-set-selections <<< 'mariadb-server-5.5 mysql-server/root_password_again password '$PASSWORD
echo "Enable the Openstack repository"
sleep 3
       apt -y install software-properties-common
       add-apt-repository -y cloud-archive:newton
       apt update && apt -y dist-upgrade
echo "Install the Openstack client"
sleep 3
       apt -y install python-openstackclient
echo "Start to Install Database"
sleep 3
       apt -y install mariadb-server python-pymysql
echo "Create and edit the files/etc/mysql/mariadb.conf.d/99-openstack.cnf"
cd /etc/mysql/mariadb.conf.d/
    if [ ! -f "$file" ] ; then
        # if not create the file
cat > $file << EOF
[mysqld]
bind-address = 10.192.16.38
default-storage-engine = innodb
innodb_file_per_table
max_connections = 4096
collation-server = utf8_general_ci
character-set-server = utf8
EOF
    else echo "$file existe"
    fi
echo "Restart the database service"
sleep 3
service mysql restart
echo "Start to Install RabbitMQ"
sleep 3
       apt -y install rabbitmq-server
       rabbitmqctl add_user openstack $PASSWORD
       rabbitmqctl set_permissions openstack ".*" ".*" ".*"
echo "Start to install memcached"
sleep 3
       apt -y install memcached python-memcache
echo "Edit the /etc/memcached.conf"
sleep 3
cp /etc/memcached.conf /etc/memcached.conf~
sed -i 's/127.0.0.1/10.192.16.38/g' /etc/memcached.conf
service memcached restart
echo "start to Install Keystone"
sleep 3
cat << EOF |  mysql -uroot -p$PASSWORD
#
CREATE DATABASE keystone;
GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'localhost' \
 IDENTIFIED BY '$PASSWORD';
GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'%' \
 IDENTIFIED BY '$PASSWORD';
#
CREATE DATABASE glance;
GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' IDENTIFIED BY '$PASSWORD';
GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' IDENTIFIED BY '$PASSWORD';
#
CREATE DATABASE nova_api;
CREATE DATABASE nova;
GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'localhost' \
 IDENTIFIED BY '$PASSWORD';
GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'%' \
 IDENTIFIED BY '$PASSWORD';
GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'localhost' \
 IDENTIFIED BY '$PASSWORD';
GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'%' \
 IDENTIFIED BY '$PASSWORD';
#
CREATE DATABASE neutron;
GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'localhost' \
 IDENTIFIED BY '$PASSWORD';
GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'%' \
 IDENTIFIED BY '$PASSWORD';
EOF
apt -y install keystone
mv /etc/keystone/keystone.conf /etc/keystone/keystone.conf~
cp $CONFIG_DIR/keystone.conf /etc/keystone/
su -s /bin/sh -c "keystone-manage db_sync" keystone
keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone
keystone-manage credential_setup --keystone-user keystone --keystone-group keystone
keystone-manage bootstrap --bootstrap-password $PASSWORD \
 --bootstrap-admin-url http://controller:35357/v3/ \
 --bootstrap-internal-url http://controller:35357/v3/ \
 --bootstrap-public-url http://controller:5000/v3/ \
 --bootstrap-region-id RegionOne
echo "Start Apache configuration"
sleep 3

You need to change what is in red in the script to match your environment

Compute node installation

Login to your compute node as root and copy the script below into you root directory. For the compute node, I am using also password-password1. You can change this with your own password.

vi install-compute-node.sh

#!/bin/bash
if [ "$(id -u)" != "0" ]; then
  echo "This script must be run as root" 1>&2
  exit 1
fi
PASSWORD=password1
CONFIG_DIR=/root/compute
echo "Enable the Openstack repository"
sleep 3
       apt -y install software-properties-common
       add-apt-repository -y cloud-archive:newton
       apt update && apt -y dist-upgrade
echo "Install the Openstack client"
sleep 3
       apt -y install python-openstackclient
echo "Install libvirt-bin"
sleep 3
       sudo apt-get -y install libvirt-bin
##Install nova compute
echo "Start to Install Nova"
sleep 3
       apt-get install -y nova-compute
       mv /etc/nova/nova.conf /etc/nova/nova.conf~
       cp $CONFIG_DIR/nova.conf /etc/nova
       chown nova:nova /etc/nova/nova.conf
       service nova-compute restart
sleep 3
##neutron installation
echo "Install the network components"
sleep 3
apt install -y neutron-linuxbridge-agent
mv /etc/neutron/neutron.conf /etc/neutron/neutron.conf~
cp $CONFIG_DIR/neutron.conf /etc/neutron/neutron.conf
chown root:neutron /etc/neutron/neutron.conf
mv /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini~
cp $CONFIG_DIR/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini
service nova-compute restart
sleep 3
service neutron-linuxbridge-agent restart
sleep 3

References

https://docs.openstack.org/newton/install-guide-ubuntu/

Difference between revisions of "How to install Openstack Newton"

Revision as of 21:30, 22 August 2018

Contents

Prerequisites

Hardware requirements

Networking

Controller node

Update hosts file

update Interface

Compute node

Update hosts file

Update interface

Testing Network

Controller node installation

Compute node installation

References

Navigation menu

Search