Difference between revisions of "JunOS Basics"
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
=Accessing the device= | =Accessing the device= | ||
* Step 1: Plug the console cable to you device into the console port and start screen as root user on your laptop | * Step 1: Plug the console cable to you device into the console port and start screen as root user on your laptop | ||
| − | screen | + | screen /dev/ttyUSB0 |
* step 2: Power on your device | * step 2: Power on your device | ||
Revision as of 18:41, 28 August 2018
In this Tutorial We will be discussing about the basic of the JunOS which will include:
- How to setup the root password
- How to change the device name
- How to create a user with admin right using a password and using a SSH key
- How to setup the management interface to ssh in to the switch
- How to create VLAN's
- How to create access and trunk ports
- How to create interfaces range
- How to connect 2 switches
Prerequisites
To complete this tutorial, you will need:
- A laptop running Linux or MacOS. for this tutorial I will be using a laptop running Ubuntu 16
- A console cable. Since all the new laptops today don't come with a USB port, you will need a USB to Console adapter
- The program "Screen"
If you don't have "screen" install it with the command below
sudo apt-get install screen
Accessing the device
- Step 1: Plug the console cable to you device into the console port and start screen as root user on your laptop
screen /dev/ttyUSB0
- step 2: Power on your device
- Step 3: Enter the username and password
How to setup the root password
When you come from a CISCO world like me, at the beginning it is a little bit confusing when working with JunOS. But, with time running a couple of commands, you get use to the concept.