Difference between revisions of "Juniper Collapsed Spine with EVPN"
Jump to navigation
Jump to search
(→Goal) |
|||
| Line 3: | Line 3: | ||
==Prerequisites== | ==Prerequisites== | ||
| + | |||
| + | For this tutorial we will be using: | ||
| + | |||
| + | - EVE-NG 2.0.3-112 | ||
| + | |||
| + | - VQFX model: vqfx-10000 running JUNOS 19.4R1.10 for spines and leaves | ||
| + | |||
| + | - VSRX 3.0 | ||
| + | |||
| + | - Debian VM's servers | ||
==Diagram== | ==Diagram== | ||
Revision as of 23:14, 18 October 2023
Goal
In this tutorial, We will be setting up a collapsed Spine EVPN/VXLAN with multi-homing.We will using two SRX's in cluster mode to route traffic between the 2 Tenants that we will configure. We will be using BGP for the underlay and overlay.
Prerequisites
For this tutorial we will be using:
- EVE-NG 2.0.3-112
- VQFX model: vqfx-10000 running JUNOS 19.4R1.10 for spines and leaves
- VSRX 3.0
- Debian VM's servers
Diagram
Setup and configuration
| Devices | Role | lo.0 IP | interface/IP | ae0 IP | mgmt | AS |
| cc1 | core swtich1 | 10.179.1.1/32 | 172.16.3.1/30 | 10.193.0.105/24 | 64701 | |
| cc2 | core switch2 | 10.179.1.2/32 | 172.16.3.2/30 | 10.193.0.106/24 | 64701 | |
| sw1 | switch 1 | 10.179.1.4/32 | 10.193.0.108/24 | |||
| sw2 | switch 2 | 10.179.1.3/32 | 10.193.0.107/24 | |||
| srx | ||||||
| srv1 | Server1 | |||||
| srv2 | Server2 | |||||
| srv3 | Server3 | |||||
| srv4 | Server4 | |||||
| srv5 | Server5 | |||||
| srv6 | Server6 | |||||
| srv7 | Server7 | |||||
| srv8 | Server8 |