Difference between revisions of "JunOS BGP"
Jump to navigation
Jump to search
| Line 19: | Line 19: | ||
=Accessing the device= | =Accessing the device= | ||
| − | + | [[https://www.papaulgigitech.com/wiki/JunOS_Basics#Accessing_the_device]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
=How to setup the root password= | =How to setup the root password= | ||
Revision as of 21:27, 1 March 2019
In this Tutorial We will be discussing how to setup an External Border Gateway Protocol (EBGP) between two routers.
Prerequisites
To complete this tutorial, you will need:
- A laptop running Linux or MacOS. for this tutorial I will be using a laptop running Ubuntu 16
- A console cable. Since all the new laptops today don't come with a USB port, you will need a USB to Console adapter
- The program "Screen"
If you don't have "screen" install it with the command below
sudo apt-get install screen
The Goal
Our goal is to setup the network like in the above image.
We have 2 offices. One in Texas and the other one in San Fransisco. Both offices have a Juniper MX80 router. The Texas router cr1-tx is in AS 17 and the San Fransico router cr1-sfo is in AS 29. We need to setup an External Border Gateway Protocol (EBGP) to connect both offices.
Accessing the device
[[1]]