Difference between revisions of "JunOS BGP"
| Line 18: | Line 18: | ||
17 and the San Fransico router cr1-sfo is in AS 29. We need to setup an External Border Gateway Protocol (EBGP) to connect both offices. | 17 and the San Fransico router cr1-sfo is in AS 29. We need to setup an External Border Gateway Protocol (EBGP) to connect both offices. | ||
| − | = | + | =Router Setup= |
| + | We are going to perform the basic setup of the router like we did for the switches in | ||
| + | [[JunOS Basics[https://www.papaulgigitech.com/wiki/JunOS_Basics]] | ||
| − | + | The process is the same.Please refer to the link above | |
| − | + | - Access the router | |
| − | + | - Setup the root password | |
| − | + | - Setup the device name | |
| − | + | - Create a privilege user | |
| − | + | - setup Management interface and enable SSH | |
Revision as of 22:09, 1 March 2019
In this Tutorial We will be discussing how to setup an External Border Gateway Protocol (EBGP) between two routers.
Prerequisites
To complete this tutorial, you will need:
- A laptop running Linux or MacOS. for this tutorial I will be using a laptop running Ubuntu 16
- A console cable. Since all the new laptops today don't come with a USB port, you will need a USB to Console adapter
- The program "Screen"
If you don't have "screen" install it with the command below
sudo apt-get install screen
The Goal
Our goal is to setup the network like in the above image.
We have 2 offices. One in Texas and the other one in San Fransisco. Both offices have a Juniper MX80 router. The Texas router cr1-tx is in AS 17 and the San Fransico router cr1-sfo is in AS 29. We need to setup an External Border Gateway Protocol (EBGP) to connect both offices.
Router Setup
We are going to perform the basic setup of the router like we did for the switches in [[JunOS Basics[1]]
The process is the same.Please refer to the link above - Access the router - Setup the root password - Setup the device name - Create a privilege user - setup Management interface and enable SSH