Difference between revisions of "JunOS BGP"
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
17 and the San Fransico router cr1-sfo is in AS 29. We need to setup an External Border Gateway Protocol (EBGP) to connect both offices. | 17 and the San Fransico router cr1-sfo is in AS 29. We need to setup an External Border Gateway Protocol (EBGP) to connect both offices. | ||
| − | Accessing the device= | + | =Accessing the device= |
* Step 1: Plug the console cable to you device into the console port and start screen as root user on your laptop | * Step 1: Plug the console cable to you device into the console port and start screen as root user on your laptop | ||
screen /dev/ttyUSB0 | screen /dev/ttyUSB0 | ||
Revision as of 21:17, 1 March 2019
In this Tutorial We will be discussing how to setup an External Border Gateway Protocol (EBGP) between two routers.
Prerequisites
To complete this tutorial, you will need:
- A laptop running Linux or MacOS. for this tutorial I will be using a laptop running Ubuntu 16
- A console cable. Since all the new laptops today don't come with a USB port, you will need a USB to Console adapter
- The program "Screen"
If you don't have "screen" install it with the command below
sudo apt-get install screen
The Goal
Our goal is to setup the network like in the above image.
We have 2 offices. One in Texas and the other one in San Fransisco. Both offices have a Juniper MX80 router. The Texas router cr1-tx is in AS 17 and the San Fransico router cr1-sfo is in AS 29. We need to setup an External Border Gateway Protocol (EBGP) to connect both offices.
Accessing the device
- Step 1: Plug the console cable to you device into the console port and start screen as root user on your laptop
screen /dev/ttyUSB0
- step 2: Power on your device
After the device finished booting you will get at the prompt below
- Step 3: Enter the username and password
By default, all Juniper devices username is "root" with no password. At the prompt, just type in root and hit enter
