Difference between revisions of "Juniper Collapsed Spine with EVPN"
Jump to navigation
Jump to search
| Line 32: | Line 32: | ||
|ae6 interfaces | |ae6 interfaces | ||
|mgmt | |mgmt | ||
| − | | | + | |local-as underlay |
| + | |local-as overlay | ||
|- | |- | ||
| Line 45: | Line 46: | ||
|xe-0/0/8 | |xe-0/0/8 | ||
|10.193.0.105/24 | |10.193.0.105/24 | ||
| − | | | + | |65012 |
|- | |- | ||
|cc2 | |cc2 | ||
| Line 51: | Line 52: | ||
|10.179.1.2/32 | |10.179.1.2/32 | ||
|172.16.3.2/30 | |172.16.3.2/30 | ||
| − | + | |xe-0/0[10-11] | |
| − | | | + | |xe-0/0/0 |
| − | | | + | |xe-0/0/1 |
| − | | | + | |xe-0/0/9 |
| − | | | + | |xe-0/0/8 |
|10.193.0.106/24 | |10.193.0.106/24 | ||
| − | | | + | |65013 |
|- | |- | ||
|sw1 | |sw1 | ||
Revision as of 23:43, 18 October 2023
Goal
In this tutorial, We will be setting up a collapsed Spine EVPN/VXLAN with multi-homing.We will using two SRX's in cluster mode to route traffic between the 2 Tenants that we will configure. We will be using BGP for the underlay and overlay.
Prerequisites
For this tutorial we will be using:
- EVE-NG 2.0.3-112
- VQFX model: vqfx-10000 running JUNOS 19.4R1.10 for spines and leaves
- VSRX 3.0
- Debian VM's servers
Diagram
Setup and configuration
| Devices | Role | lo.0 IP | ae0 IP | ae0 interfaces | ae1 interfaces | ae2 interfaces | ae5 interfaces | ae6 interfaces | mgmt | local-as underlay | local-as overlay |
| cc1 | core swtich1 | 10.179.1.1/32 | 172.16.3.1/3 | xe-0/0[10-11] | xe-0/0/0 | xe-0/0/1 | xe-0/0/9 | xe-0/0/8 | 10.193.0.105/24 | 65012 | |
| cc2 | core switch2 | 10.179.1.2/32 | 172.16.3.2/30 | xe-0/0[10-11] | xe-0/0/0 | xe-0/0/1 | xe-0/0/9 | xe-0/0/8 | 10.193.0.106/24 | 65013 | |
| sw1 | switch 1 | ||||||||||
| sw2 | switch 2 | ||||||||||
| srx | |||||||||||
| srv1 | Server1 | ||||||||||
| srv2 | Server2 | ||||||||||
| srv3 | Server3 | ||||||||||
| srv4 | Server4 | ||||||||||
| srv5 | Server5 | ||||||||||
| srv6 | Server6 | ||||||||||
| srv7 | Server7 | ||||||||||
| srv8 | Server8 |