Juniper EVPN-VXLAN Centrally Routed Bridging configuration

From ppwiki
Revision as of 01:25, 19 May 2022 by Admin (talk | contribs) (Created page with "==Goal== In this tutorial we will setup a spine/leaf topology with 2 spines and 2 leaves. The goal is to configure EVPN-VXLAN centrally Routed Bridging (CRB) ==What is Centr...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Goal

In this tutorial we will setup a spine/leaf topology with 2 spines and 2 leaves. The goal is to configure EVPN-VXLAN centrally Routed Bridging (CRB)

What is Centrally Routed Bridging?=

Centrally Routed Bridging( CRB) is just another mechanism that provides routing functionally within the EVPN-VXLAN fabric.

In the CRB design, the inter-VXLAN routing is performed by the spine devices.

Prerequisites

For this tutorial I am using :

- EVE-NG 2.0.3-112

- VQFX model: vqfx-10000 running JUNOS 19.4R1.10

- Four(4) servers

Diagram

File:.png

Setup and Configuration

Spine1 configuration

Spine2 configuration

leaf1 configuration

leaf2 configuration

References

https://blogs.juniper.net/en-us/enterprise-cloud-and-transformation/exploring-evpn-vxlan-overlay-architectures-centrally-routed-bridging

Retrieved from "https://papaulgigitech.com/index.php?title=Juniper_EVPN-VXLAN_Centrally_Routed_Bridging_configuration&oldid=3079"